Product Description
1.Convenient to adjust
2.Wide range of ratio
3.Easy to install
4.high torque
Application Industries:
Our SWL series screw jacks are widely used in the industries such as metallurgy,mining,hoisting and transportation, electrical
power,energy source,constrction and building material,light industry and traffice industry
Screw Jacks in construction
Often found in climbing mechanism of construction,the screw jacks use physical means to raise and lower loads, which typically range from 5 tons to 30 tons. A screw jack is a common type of mechanical jack, which works via a motor and gearbox by an operator. A screw uses the shape of its threads to raise or lower the load, or a traveling nut does the lifting while the screw turns in place. Mechanical jacks are self-locking(not for ball screw), which means that when power is removed from the jack, the screw stays in place until power resumes. This setup makes mechanical jacks safer than their hydraulic counterparts, because users don’t have to fear a loss of power. The main components of screw jacks are; trapezoidal lifting screw also known as lead screw, worm screw, worm gear and gear housing. A worm screw is rotated manually or by a motor. With the rotation of the worm gear, the lead screw in it moves upwards or downwards linearly. The feed rate of the screw depends on the turning speed, the number of teeth of the gears and the size of the screw pitch. In some models of jackscrews, The lifting screw does not move up and down. It only rotates around its axis. A lifting nut (also known as a travelling nut) moves along the lead screw. The lifting nut of the screw jack is made of bronze to decrease friction.
Product Parameters
MODEL |
|
SWL2.5 |
SWL5 |
SWL10 |
SWL15 |
SWL20 |
SWL25 |
SWL35 |
Maximum lifting force (kN) |
|
25 |
50 |
100 |
150 |
200 |
250 |
350 |
Screw thread size |
|
Tr30*6 |
Tr40*7 |
Tr58*12 |
Tr58*12 |
Tr65*12 |
Tr90*16 |
Tr100*20 |
Maximum tension (kN) |
|
25 |
50 |
99 |
166 |
250 |
350 |
|
Worm gear ratio (mm) |
P |
1/6 |
1/8 |
3/23 |
1/8 |
3/32 |
3/32 |
|
|
M |
1/24 |
1/24 |
1/24 |
1/24 |
1/32 |
1/32 |
|
Worm non rotating stroke (mm) |
P |
1.0 |
0.875 |
1.565 |
1.56 |
1.5 |
1.875 |
|
M |
0.250 |
0.292 |
0.5 |
0.5 |
0.5 |
0.625 |
||
Maximum elongation of screw rod under tensile load (mm) |
|
1500 |
2000 |
2500 |
3000 |
3500 |
4000 |
|
Maximum lifting height at maximum pressure load (mm) |
The head of the screw rod is not guided |
250 |
385 |
500 |
400 |
490 |
850 |
820 |
Lead screw head guide |
400 |
770 |
1000 |
800 |
980 |
1700 |
1640 |
|
Worm torque at full load(N.m) |
P |
18 |
39.5 |
119 |
179 |
240 |
366 |
464 |
M |
8.86 |
19.8 |
60 |
90 |
122 |
217 |
253 |
|
efficiency(%) |
P |
22 |
23 |
20.5 |
|
19.5 |
16 |
18 |
M |
11 |
11.5 |
13 |
|
12.8 |
9 |
11 |
|
Weight without stroke(kg) |
|
7.3 |
16.2 |
25 |
|
36 |
70.5 |
87 |
Weight of screw rod per 100mm(kg) |
|
0.45 |
0.82 |
1.67 |
|
2.15 |
4.15 |
5.20 |
Detailed Photos
SWL Series worm screw Jack:
1.The elevator is a combination of turbine pair and trapezoid screw rod to complete the lifting and lowering of objects. 2.Compact structure, light weight, safety and reliability, long service life, convenient installation
3.Self-locking function in the static state.
1. screw rod |
2. nut bolt |
3. cover |
4.Skeleton oil seal |
5.Bearing |
6.Worm gear |
7.Oil filling hole |
8.Case |
9.Skeleton oil seal |
10.Cover |
11. nut bolt |
12.Bearing |
13.Skeleton oil seal |
14.Bearing |
15.worm |
16.Flat key |
17.Bearing |
18.Skeleton oil seal |
19.Cover |
20.Nut bolt |
Product Description
Related Products
Packaging & Shipping
Company Profile
Standard or Nonstandard: | Nonstandard |
---|---|
Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Power Transmission |
Customized Support: | OEM, ODM, Obm |
Brand Name: | Beiji or Customized |
Certificate: | ISO9001:2008 |
Structures: | Worm Gear and Worm |
Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
---|
Can you provide examples of machinery that use screw gears?
Screw gears, also known as worm gears, are widely used in various machinery and mechanical systems. These gears offer advantages such as high gear ratios, compact design, and smooth torque transmission. Here are some examples of machinery that commonly utilize screw gears:
- Elevators: Screw gears are commonly employed in elevator systems to provide vertical movement. The worm gear and worm wheel arrangement allows for controlled and precise lifting and lowering of the elevator car.
- Conveyors: Screw gears are utilized in conveyor systems to transport materials or products horizontally or at an incline. The screw gear system ensures smooth and efficient movement of the conveyor belt or other conveying elements.
- Automotive Applications: Screw gears are found in various automotive applications, including power windows, convertible tops, and seat adjusters. They enable the conversion of rotational motion into linear motion, allowing for precise control and adjustment of these components.
- Mechanical Presses: Screw gears are used in mechanical presses to generate high forces for operations such as metal forming, stamping, and pressing. The screw gear system provides the necessary torque and power transmission required for these heavy-duty applications.
- Valve Actuators: Screw gears are employed in valve actuators to control the opening and closing of valves in industrial processes. The worm gear mechanism allows for precise and reliable valve positioning and control.
- Packaging Machinery: Screw gears are utilized in packaging machinery, such as filling machines and capping machines, to control the movement and positioning of packaging components. They ensure accurate and synchronized operations during the packaging process.
- Machine Tools: Screw gears are commonly found in machine tools, including milling machines, lathes, and precision equipment. They enable precise control of the tool movement, feeds, and positioning, ensuring accurate machining operations.
- Constructions Machinery: Screw gears are used in construction machinery, such as cranes and lifting equipment, to control the movement of load-carrying components. The worm gear system provides the necessary torque and stability required for lifting heavy loads.
- Food Processing Equipment: Screw gears are employed in food processing equipment, such as mixers and extruders, to control the mixing, blending, and extrusion processes. They ensure accurate and consistent product quality and texture.
- Robotic Systems: Screw gears are utilized in robotic systems for various applications, including robotic arms and grippers. They enable precise and controlled movement, allowing robots to perform complex tasks with accuracy.
These are just a few examples of the many machinery and systems that utilize screw gears. Their versatility and ability to provide precise motion control make them suitable for a wide range of industrial and mechanical applications.
Can screw gears be used in automotive applications?
Yes, screw gears, also known as worm gears, can be used in various automotive applications. While other types of gears, such as spur gears and helical gears, are more commonly found in automotive systems, screw gears offer certain advantages that make them suitable for specific automotive applications. Here’s a detailed explanation of using screw gears in automotive applications:
- Steering Systems: Screw gears are commonly used in automotive steering systems, particularly in rack and pinion steering systems. The worm gear and worm wheel arrangement provides a compact and efficient means of converting rotational motion into linear motion, allowing for precise and responsive steering control. Screw gears in steering systems can offer enhanced safety, reliability, and ease of operation.
- Convertible Roof Mechanisms: Screw gears can be utilized in convertible roof mechanisms to facilitate the opening and closing of the roof. The self-locking characteristic of screw gears is advantageous in this application, as it helps to hold the roof securely in place without the need for additional locking mechanisms. Screw gears can provide smooth and controlled operation, ensuring reliable and convenient roof operation in convertible vehicles.
- Power Seats and Adjustable Pedals: Automotive power seats and adjustable pedals often employ screw gears to enable precise positioning adjustments. The compact design and precise motion control of screw gears make them suitable for these applications. Screw gears can offer smooth and accurate seat adjustments, enhancing comfort and ergonomics for the vehicle occupants.
- Accessory Drives: Screw gears can be utilized in automotive accessory drives, such as windshield wiper systems and HVAC (Heating, Ventilation, and Air Conditioning) systems. The self-locking feature of screw gears can be beneficial in maintaining the position of the wiper arms or controlling the position of HVAC blend doors. Screw gears can provide reliable and precise motion control for these auxiliary systems.
- Brake Systems: Screw gears can be employed in certain automotive brake systems, such as parking brake mechanisms. The self-locking property of screw gears can help hold the brake in the engaged position, providing additional safety and preventing unintended movement. Screw gears in brake systems can contribute to reliable parking brake operation and vehicle stability while parked.
- Electric Vehicle Applications: With the rise of electric vehicles (EVs), screw gears are being considered for various EV applications. They can be used in electric power steering systems, electric vehicle range extenders, and other drivetrain components. Screw gears can provide efficient power transmission and precise control, supporting the performance and functionality of electric vehicles.
- Other Specific Applications: Screw gears can find application in other specialized automotive systems, depending on the specific requirements. For example, they may be used in adjustable headlight leveling systems, throttle control mechanisms, or other systems that require precise motion control and position holding.
While screw gears may not be as prevalent in automotive applications compared to other gear types, they offer unique characteristics that make them suitable for specific functions. By considering the design requirements, load conditions, and operational parameters, screw gears can be effectively employed in automotive systems to enhance functionality, safety, and user experience.
How do you choose the right size screw gear for your application?
Choosing the right size screw gear for your application involves considering several factors to ensure optimal performance and compatibility. Here are the key steps to follow when selecting a screw gear:
- Determine the Application Requirements: Start by understanding the specific requirements of your application. Consider factors such as the desired gear reduction ratio, torque requirements, rotational speed, load capacity, and precision positioning needs. Having a clear understanding of your application’s requirements will help guide the selection process.
- Calculate the Gear Ratio: Determine the required gear reduction ratio by considering the speed and torque specifications of your application. The gear reduction ratio is calculated by dividing the input speed by the output speed. This ratio will help narrow down the options for suitable screw gears.
- Evaluate Load Capacity: Assess the load capacity requirements of your application. Consider the maximum load that the screw gear needs to handle. This includes both the static load (the load when the system is at rest) and the dynamic load (the load during operation). Ensure that the selected screw gear can handle the anticipated loads without experiencing excessive wear or failure.
- Consider Torque Requirements: Determine the required torque output of the screw gear to meet the demands of your application. Calculate the torque by multiplying the load torque by the gear reduction ratio. Ensure that the selected screw gear can provide the necessary torque output to drive the load effectively.
- Analyze Speed and Efficiency: Evaluate the desired rotational speed and efficiency of the screw gear system. Consider the input speed, output speed, and efficiency requirements of your application. Ensure that the selected screw gear can operate within the desired speed range while maintaining the required efficiency levels.
- Check Mounting and Space Constraints: Assess the available space and mounting requirements in your application. Consider factors such as the required size, shape, and mounting configuration of the screw gear. Ensure that the selected screw gear can be properly installed and integrated into your application without any space or mounting constraints.
- Consider Material and Lubrication: Evaluate the environmental conditions and operating parameters of your application. Consider factors such as temperature, humidity, exposure to contaminants, and the need for corrosion resistance. Select a screw gear made from materials suitable for the application environment. Additionally, consider the lubrication requirements and ensure that the selected screw gear can be adequately lubricated for smooth operation and reduced wear.
- Consult Manufacturers and Suppliers: Seek advice and consult with manufacturers or suppliers of screw gears. They can provide valuable insights and recommendations based on their expertise and product knowledge. Provide them with the specific details of your application requirements for better guidance in selecting the appropriate screw gear.
By following these steps and considering the factors mentioned, you can choose the right size screw gear that matches the requirements of your application. It is crucial to ensure that the selected screw gear can handle the load, provide the necessary torque and speed, fit within the available space, and operate effectively in the application environment.
editor by CX 2023-11-10